Occupation Profile for Ophthalmic Laboratory Technicians

Cut, grind, and polish eyeglasses, contact lenses, or other precision optical elements. Assemble and mount lenses into frames or process other optical elements.

 
 

Significant Points

  • Around 55 percent of salaried jobs were in medical equipment and supply manufacturing laboratories, which usually are small, privately owned businesses with fewer than 5 employees.
  • Most technicians learn their craft on the job, but many employers prefer to hire those with formal training.
  • Slower-than-average employment growth is expected for dental and ophthalmic laboratory technicians, while average employment growth is expected for medical appliance technicians.
  • Job opportunities should be favorable because few people seek these positions.

 

 
 
Overview
$25,460.00 Median Annual Wage 1,000 Average Job Openings Per Year
3.4 Average Unemployment Percentage 42.5 Percentage That Completed High School
29,000 Employment Numbers in 2006 46.0 Percentage That Had Some College
31,000 Employment Numbers in 2016 (est.) 11.5 Percentage That Went Beyond College Degree

Sample Job Titles
Apprentice, Lens Grinder
Apprentice, Precision Lens Grinder
Artificial Glass Eye Maker
Artificial Plastic Eye Maker
Bench Hand
Bench Optician
Bevel Polisher
Beveler
Blocker and Cutter, Contact Lens
Contact Lens Blocker
Contact Lens Cutter
Contact Lens Manufacturer
Cylinder Grinder
Cylinder Worker
Diamond Grinder
Dotter
Drill Operator, Optical Goods
Driller
Drilling Machine Operator, Optical Goods
Edge Grinder
Edger
Edger Technician
Eyeglass Cutter
Eyeglass Lens Cutter
Eyeglass Maker
Finishing Lab Technician
Glass Cutter
Glass Cutter, Hand
Glass Frame Fitter
Glass Silverer
Grinder
Lab Manager
Lab Optician
Lab Technician
Lathe Operator
Lathe Operator, Contact Lens
Layout Technician
Lens Cementer
Lens Coating Technician
Lens Cutter
Lens Dotter
Lens Edger
Lens Fabricating Machine Tender
Lens Finisher
Lens Generator
Lens Grinder
Lens Grinder and Polisher
Lens Maker
Lens Mold Setter
Lens Mounter
Lens Polisher
Lens Polisher, Hand
Lens Shaper Grinder
Lens Silverer
Line Operator
Mechanic, Optical
Optical Element Coater
Optical Instrument Assembler
Optical Lab Technician
Optical Laboratory Mechanic
Optical Technician
Optical Worker
Optician
Optician Apprentice
Polisher
Precision Lens Centerer and Edger
Precision Lens Generator
Precision Lens Grinder
Precision Lens Grinder Apprentice
Precision Lens Polisher
Precision Optical Goods Worker
Prism Measurer
Shop Optician, Benchroom
Shop Optician, Surface Room
Spectacle Truer
Spotter
Surface Grinder
Surface Room Floater
Surfacer
Surfacing Technican
Technician, Contact Lens
Technician, Layout
Technician, Ophthalmic
Technician, Optical

Training
  • These occupations often involve using your knowledge and skills to help others. Examples include sheet metal workers, forest fire fighters, customer service representatives, pharmacy technicians, salespersons (retail), and tellers.
  • These occupations usually require a high school diploma and may require some vocational training or job-related course work. In some cases, an associate's or bachelor's degree could be needed.
  • Some previous work-related skill, knowledge, or experience may be helpful in these occupations, but usually is not needed. For example, a teller might benefit from experience working directly with the public, but an inexperienced person could still learn to be a teller with little difficulty.
  • Employees in these occupations need anywhere from a few months to one year of working with experienced employees.

Most medical, dental, and ophthalmic laboratory technicians learn their craft on the job; however, many employers prefer to hire those with formal training.

Education and training. High school students interested in becoming medical appliance technicians should take mathematics, metal and wood shop, and drafting. Medical appliance technicians usually begin as helpers and gradually learn new skills as they gain experience.

Formal training is also available. In 2006, there were four orthotic and prosthetic technician programs accredited by the National Commission on Orthotic and Prosthetic Education (NCOPE). These programs offer either an associate degree or a 1-year certificate for orthotic or prosthetic technicians. The programs instruct students on human anatomy and physiology, orthotic and prosthetic equipment and materials, and applied biomechanical principles to customize orthotics or prostheses. The programs also include clinical rotations to provide hands-on experience.

Dental laboratory technicians begin by learning simple tasks, such as pouring plaster into an impression, and progress to more complex procedures, such as making porcelain crowns and bridges. Becoming a fully trained technician requires an average of 3 to 4 years, depending upon the individual’s aptitude and ambition, but it may take a few years more to become an accomplished technician. High school students interested in becoming dental laboratory technicians should take courses in art, metal and wood shop, drafting, and sciences. Courses in management and business may help those wishing to operate their own laboratories.

Training in dental laboratory technology also is available through community and junior colleges, vocational-technical institutes, and the Armed Forces. Formal training programs vary greatly both in length and in the level of skill they impart. In 2006, 20 programs in dental laboratory technology were accredited by the Commission on Dental Accreditation in conjunction with the American Dental Association. These programs provide classroom instruction in dental materials science, oral anatomy, fabrication procedures, ethics, and related subjects. In addition, each student is given supervised practical experience in a school or an associated dental laboratory. Accredited programs normally take 2 years to complete and lead to an associate degree. A few programs take about 4 years to complete and offer a bachelor’s degree in dental technology. Graduates of 2-year training programs need additional hands-on experience to become fully qualified.

Each dental laboratory owner operates in a different way, and classroom instruction does not necessarily expose students to techniques and procedures favored by individual laboratory owners. Students who have taken enough courses to learn the basics of the craft usually are considered good candidates for training, regardless of whether they have completed a formal program. Many employers will train someone without any classroom experience.

Ophthalmic laboratory technicians start on simple tasks if they are training to produce lenses by hand. They may begin with marking or blocking lenses for grinding; then, they progress to grinding, cutting, edging, and beveling lenses; finally, they are trained in assembling the eyeglasses. Depending on individual aptitude, it may take up to 6 months to become proficient in all phases of the work.

Employers filling trainee jobs prefer applicants who are high school graduates. Courses in science, mathematics, and computers are valuable; manual dexterity and the ability to do precision work are essential. Technicians using automated systems will find computer skills valuable.

A few ophthalmic laboratory technicians learn their trade in the Armed Forces or in the few programs in optical technology offered by vocational-technical institutes or trade schools. These programs have classes in optical theory, surfacing and lens finishing, and the reading and applying of prescriptions. Programs vary in length from 6 months to 1 year and award certificates or diplomas.

Other qualifications. A high degree of manual dexterity, good vision, and the ability to recognize very fine color shadings and variations in shape also are necessary for dental technicians. An artistic aptitude for detailed and precise work also is important.

Certification and advancement. Voluntary certification for orthotic and prosthetic technicians is available through the American Board for Certification in Orthotics and Prosthetics (ABC). Applicants are eligible for an exam after completing a program accredited by NCOPE or obtaining 2 years of experience as a technician under the direct supervision of an ABC-certified practitioner. After successfully passing the appropriate exam, technicians receive the Registered Orthotic Technician, Registered Prosthetic Technician, or Registered Prosthetic-Orthotic Technician credential. Certification may help those orthotic and prosthetic technicians seeking to advance.

With additional formal education, medical appliance technicians who make orthotics and prostheses can advance to become orthotists or prosthetists, technicians who work with patients who need braces, artificial limbs, or related devices and help to determine the specifications for those devices.

In large dental laboratories, dental technicians may become supervisors or managers. Experienced technicians may teach or take jobs with dental suppliers in such areas as product development, marketing, and sales. Opening one’s own laboratory is another, and more common, way to advance and earn more.

The National Board for Certification, an independent board established by the National Association of Dental Laboratories, offers certification in dental laboratory technology. Certification, which is voluntary except in three states, can be obtained in five specialty areas: crowns and bridges, ceramics, partial dentures, complete dentures, and orthodontic appliances. Certification may increase chances of advancement.

Ophthalmic laboratory technicians can become supervisors and managers. Some become dispensing opticians, although further education or training generally is required in that occupation.

Nature of Work

When patients require a medical device to help them see clearly, chew and speak well, or walk, their health care providers send requests to medical, dental, and ophthalmic laboratory technicians. These technicians produce a variety of implements to help patients.

Medical appliance technicians construct, fit, maintain, and repair braces, artificial limbs, joints, arch supports, and other surgical and medical appliances. They follow prescriptions or detailed instructions from podiatrists or orthotists, who request braces, supports, corrective shoes, or other devises; prosthetists, who order prostheses—replacement limbs, such as an arm, leg, hand, or foot—for patients who need them due to a birth defect, accident, or amputation; or other health care professionals. Medical appliance technicians who work with these types of devices are called orthotic and prosthetic technicians. Other medical appliance technicians work with appliances that help correct other medical problems, such as hearing aids.

Creating medical devices takes several steps. To make arch supports, for example, technicians first make a wax or plastic impression of the patient’s foot. Then they bend and form a material so that it conforms to prescribed contours required to fabricate structural components. If a support is mainly required to correct the balance of a patient with legs of different lengths, a rigid material is used. If the support is primarily intended to protect those with arthritic or diabetic feet, a soft material is used. Supports and braces are polished with grinding and buffing wheels. Technicians may cover arch supports with felt to make them more comfortable.

For prostheses, technicians construct or receive a plaster cast of the patient’s limb to use as a pattern. Then, they lay out parts and use precision measuring instruments to measure them. Technicians may use wood, plastic, metal, or other material for the parts of the artificial limb. Next, they carve, cut, or grind the material using hand or power tools. Then, they drill holes for rivets and glue, rivet, or weld the parts together. They are able to do very precise work using common tools. Next, technicians use grinding and buffing wheels to smooth and polish artificial limbs. Lastly, they may cover or pad the limbs with rubber, leather, felt, plastic, or another material. Also, technicians may mix pigments according to formulas to match the patient’s skin color and apply the mixture to the artificial limb.

After fabrication, medical appliance technicians test devices for proper alignment, movement, and biomechanical stability using meters and alignment fixtures. They also may fit the appliance on the patient and adjust them as necessary. Over time the appliance will wear down, so technicians must repair and maintain the device. They also may service and repair the machinery used for the fabrication of orthotic and prosthetic devices.

Dental laboratory technicians fill prescriptions from dentists for crowns, bridges, dentures, and other dental prosthetics. First, dentists send a specification of the item to be manufactured, along with an impression or mold of the patient’s mouth or teeth. With new technology, a technician may receive a digital impression rather than a physical mold. Then dental laboratory technicians, also called dental technicians, create a model of the patient’s mouth by pouring plaster into the impression and allowing it to set. They place the model on an apparatus that mimics the bite and movement of the patient’s jaw. The model serves as the basis of the prosthetic device. Technicians examine the model, noting the size and shape of the adjacent teeth, as well as gaps within the gumline. Based upon these observations and the dentist’s specifications, technicians build and shape a wax tooth or teeth model, using small hand instruments called wax spatulas and wax carvers. The wax model is used to cast the metal framework for the prosthetic device.

After the wax tooth has been formed, dental technicians pour the cast and form the metal and, using small hand-held tools, prepare the surface to allow the metal and porcelain to bond. They then apply porcelain in layers, to arrive at the precise shape and color of a tooth. Technicians place the tooth in a porcelain furnace to bake the porcelain onto the metal framework, and then adjust the shape and color, with subsequent grinding and addition of porcelain to achieve a sealed finish. The final product is a nearly exact replica of the lost tooth or teeth.

In some laboratories, technicians perform all stages of the work, whereas in other labs, each technician does only a few. Dental laboratory technicians can specialize in 1 of 5 areas: orthodontic appliances, crowns and bridges, complete dentures, partial dentures, or ceramics. Job titles can reflect specialization in these areas. For example, technicians who make porcelain and acrylic restorations are called dental ceramists.

Ophthalmic laboratory technicians—also known as manufacturing opticians, optical mechanics, or optical goods workers—make prescription eyeglass or contact lenses. Prescription lenses are curved in such a way that light is correctly focused onto the retina of the patient’s eye, improving his or her vision. Some ophthalmic laboratory technicians manufacture lenses for other optical instruments, such as telescopes and binoculars. Ophthalmic laboratory technicians cut, grind, edge, and finish lenses according to specifications provided by dispensing opticians, optometrists, or ophthalmologists and may insert lenses into frames to produce finished glasses. Although some lenses still are produced by hand, technicians are increasingly using automated equipment to make lenses.

Ophthalmic laboratory technicians should not be confused with workers in other vision care occupations. Ophthalmologists and optometrists are eye doctors who examine eyes, diagnose and treat vision problems, and prescribe corrective lenses. Ophthalmologists are physicians who also perform eye surgery. Dispensing opticians, who also may do the work of ophthalmic laboratory technicians, help patients select frames and lenses, and adjust finished eyeglasses.

Ophthalmic laboratory technicians read prescription specifications, select standard glass or plastic lens blanks, and then mark them to indicate where the curves specified on the prescription should be ground. They place the lens in the lens grinder, set the dials for the prescribed curvature, and start the machine. After a minute or so, the lens is ready to be finished by a machine that rotates it against a fine abrasive, to grind it and smooth out rough edges. The lens is then placed in a polishing machine with an even finer abrasive, to polish it to a smooth, bright finish.

Next, the technician examines the lens through a lensometer, an instrument similar in shape to a microscope, to make sure that the degree and placement of the curve are correct. The technician then cuts the lenses and bevels the edges to fit the frame, dips each lens into dye if the prescription calls for tinted or coated lenses, polishes the edges, and assembles the lenses and frame parts into a finished pair of glasses.

In small laboratories, technicians usually handle every phase of the operation. In large ones, in which virtually every phase of the operation is automated, technicians may be responsible for operating computerized equipment. Technicians also inspect the final product for quality and accuracy.

Work environment. Medical, dental, and ophthalmic laboratory technicians generally work in clean, well-lighted, and well-ventilated laboratories. They have limited contact with the public. Salaried laboratory technicians usually work 40 hours a week, but some work part time. At times, technicians wear goggles to protect their eyes, gloves to handle hot objects, or masks to avoid inhaling dust. They may spend a great deal of time standing.

Dental technicians usually have their own workbenches, which can be equipped with Bunsen burners, grinding and polishing equipment, and hand instruments, such as wax spatulas and wax carvers. Some dental technicians have computer-aided milling equipment to assist them with creating artificial teeth.

Related Occupations

Sources: Career Guide to Industries (CGI), Occupational Information Network (O*Net), Occupation Outlook Handbook (OOH)
Earnings

Median hourly earnings of wage-and-salary medical appliance technicians were $14.99 in May 2006. The middle 50 percent earned between $11.34 and $19.65 an hour. The lowest 10 percent earned less than $8.93, and the highest 10 percent earned more than $27.00 an hour.

Median hourly earnings of wage-and-salary dental laboratory technicians were $15.67 in May 2006. The middle 50 percent earned between $11.61 and $20.57 an hour. The lowest 10 percent earned less than $9.16, and the highest 10 percent earned more than $26.13 an hour. In the two industries that employed the most dental laboratory technicians, medical equipment and supplies manufacturing and offices of dentists, median hourly earnings were $15.09 and $17.74, respectively.

Median hourly earnings of wage-and-salary ophthalmic laboratory technicians were $12.24 in May 2006. The middle 50 percent earned between $9.86 and $15.82 an hour. The lowest 10 percent earned less than $8.38, and the highest 10 percent earned more than $19.98 an hour. Median hourly earnings were $11.63 in medical equipment and supplies manufacturing and $11.49 in health and personal care stores, the two industries that employ the most ophthalmic laboratory technicians.

For the latest wage information:

The above wage data are from the Occupational Employment Statistics (OES) survey program, unless otherwise noted. For the latest National, State, and local earnings data, visit the following pages:

  • Dental laboratory technicians
  • Medical appliance technicians
  • Ophthalmic laboratory technicians
  • Job Outlook

    Overall, slower-than-average growth is expected for employment of medical, dental, and ophthalmic laboratory technicians. However, job opportunities should be favorable because few people seek these positions.

    Employment change. Overall employment for these occupations is expected to grow five percent from 2006 to 2016, slower than the average for all occupations.

    Medical appliance technicians will grow at nine percent, about as fast as the average for all occupations, because of the increasing prevalence of the two leading causes of limb loss—diabetes and cardiovascular disease. In addition, advances in technology may spur demand for prostheses that allow for greater movement.

    Employment of dental laboratory technicians is expected to grow more slowly than average, at four percent. During the last few years, demand has arisen from an aging public that is growing increasingly interested in cosmetic prostheses. For example, many dental laboratories are filling orders for composite fillings that are the same shade of white as natural teeth to replace older, less attractive fillings. However, job growth for dental laboratory technicians will be limited. The overall dental health of the population has improved because of fluoridation of drinking water and greater emphasis on preventive dental care, which has reduced the incidence of dental cavities. As a result, full dentures will be less common, as most people will need only a bridge or crown.

    Ophthalmic laboratory technicians are expected to experience employment growth of seven percent, about as fast as the average for all occupations. Demographic trends make it likely that many more Americans will need vision care in the years ahead. Not only will the population grow, but also the proportion of middle-aged and older adults is projected to increase rapidly. Middle age is a time when many people use corrective lenses for the first time, and elderly persons usually require more vision care than others. However, the increasing use of automated machinery will temper job growth for ophthalmic laboratory technicians.

    Job prospects. Job opportunities for medical, dental, and ophthalmic laboratory technicians should be favorable, despite expected slower-than-average growth. Few people seek these jobs, reflecting the relatively limited public awareness and low starting wages. In addition to openings from job growth, many job openings also will arise from the need to replace technicians who transfer to other occupations or who leave the labor force.

    Employment

    Medical, dental, and ophthalmic laboratory technicians held about 95,000 jobs in 2006. About 55 percent of salaried jobs were in medical equipment and supply manufacturing laboratories, which usually are small, privately owned businesses with fewer than 5 employees. However, some laboratories are large; a few employ more than 1,000 workers. The following tabulation shows employment by detailed occupation:

    Dental laboratory technicians 53,000
    Opthalmic laboratory technicians 29,000
    Medical appliance technicians 12,000

    In addition to manufacturing laboratories, many medical appliance technicians worked in health and personal care stores, while others worked in public and private hospitals, professional and commercial equipment and supplies merchant wholesalers, or consumer goods rental centers. Some were self-employed.

    In addition to manufacturing laboratories, many dental laboratory technicians worked in offices of dentists. Some dental laboratory technicians open their own offices.

    Most ophthalmic laboratory technician jobs were in medical equipment and supplies manufacturing laboratories, about 29 percent. Another 29 percent of jobs were in health and personal care stores, such as optical goods stores that manufacture and sell prescription glasses and contact lenses. Some jobs were in offices of optometrists or ophthalmologists, while others worked at professional and commercial equipment and supplies merchant wholesalers. A few worked in commercial and service industry machine manufacturing firms that produce lenses for other optical instruments, such as telescopes and binoculars.

    Knowledge
    • Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
    • Engineering and Technology — Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
    • Sales and Marketing — Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.
    • Medicine and Dentistry — Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.
    • Physics — Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub- atomic structures and processes.
    Skills
    • Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
    • Coordination — Adjusting actions in relation to others' actions.
    • Active Learning — Understanding the implications of new information for both current and future problem-solving and decision-making.
    • Writing — Communicating effectively in writing as appropriate for the needs of the audience.
    • Troubleshooting — Determining causes of operating errors and deciding what to do about it.
    Abilities
    • Near Vision — The ability to see details at close range (within a few feet of the observer).
    • Stamina — The ability to exert yourself physically over long periods of time without getting winded or out of breath.
    • Explosive Strength — The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
    • Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
    • Hearing Sensitivity — The ability to detect or tell the differences between sounds that vary in pitch and loudness.
    Tasks
    • Supplemental — Inspect, weigh, and measure mounted or unmounted lenses after completion in order to verify alignment and conformance to specifications, using precision instruments.
    • Core — Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
    • Supplemental — Remove lenses from molds, and separate lenses in containers for further processing or storage.
    • Core — Shape lenses appropriately so that they can be inserted into frames.
    • Supplemental — Lay out lenses and trace lens outlines on glass, using templates.
    Activities
    • Monitoring and Controlling Resources — Monitoring and controlling resources and overseeing the spending of money.
    • Guiding, Directing, and Motivating Subordinates — Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
    • Assisting and Caring for Others — Providing personal assistance, medical attention, emotional support, or other personal care to others such as coworkers, customers, or patients.
    • Repairing and Maintaining Electronic Equipment — Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
    • Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
    Related College Curriculum
     
    Featured Online Colleges
     
    For more online colleges, click here.
     
    Colleges Offering Curriculum

    23 Ophthalmic Laboratory Technician Jobs Found


    Performs selected patient care tasks for patients of all ages, gender, cultures, and backgrounds in a clinic setting. In addition, laboratory and o...
    Broadlawns Medical Center - IA - Des Moines - posted 13 days ago
    Expanding Marketing company needs an energetic recruiting professional to help us keep up with the increase in demands from our clients expansion n...
    Weekly Paid Salary - CA - Berkeley - posted 3 days ago
    We are one of the nations leading events marketing team and our recent expansion team to San Francisco and the acquisition of new clients has left ...
    New York Events - Financial District - posted 9 days ago
    www.marketingon6th.com Entry Level Manager We are one of the area's premiere sales and marketing firms and is continuing to expand. We are planning...
    Event Marketing in NYC - NY - New York - posted 13 days ago
    WANT TO DO SOMETHING YOU LOVE? TIRED OF SITTING AROUND? GET OUT FROM BEHIND THE DESK! NEVER BE BORED AGAIN! ~ Everyday learn something NEW! Always ...
    MO6 INC - NY - New York - posted 13 days ago
    What Are You Looking For in a Career? •Friendly and supportive work environment •Exciting opportunities •Career growth •Stability •Progression All ...
    IMMEDIATE START - FULL TIME - NY - New York - posted 13 days ago
    At Marketing on 6th we make the magic come to life! Having opened our doors in 2013, we specialize in Corporate Events and Promotions and have alre...
    Mo6 - Downtown - posted 15 days ago
    IMMEDIATE HIRE - NO EXPERIENCE NECESSARY - FULL TIME POSITIONS ENTRY LEVEL POSITIONS IN: ENTRY LEVEL MARKETING / CUSTOMER SERVICE - RAPID ADVANCEME...
    Event Marketing on Wall ST NYC - Wall St - posted 20 days ago
    Apply Today, Start Tomorrow! Entry Level Sales & Customer Service Rep - Management Opportunity Are you looking for a career that gets you EXCITED t...
    Event Marketing on Wall ST NYC - Wall St - posted 20 days ago
    Apply Today, Start Tomorrow! Entry Level Sales & Customer Service Rep - Management Opportunity Are you looking for a career that gets you EXCITED t...
    Mo6 - Downtown - posted 24 days ago

    More Ophthalmic Laboratory Technician Job Results...
     
     
     
     
     
     

    JOB SEARCH